AISG Waterproof Electrical Connectors , 5M 8 Pin Circular Connector Hw Port

AISG Cable Ret 5M Cables Rru of Connecting for Pin Hw Port Signal 7 8 to Port Connection Jumper Control DB9 Male Female

Specifications:

Description
Degree of protection IP67
2 3 4 5 5A 6 7 8 12 14 16 19 24 poles are available
Anti-vibration locking screw design
RoHS & REACH Compliance
The cable material have PVC or PUR,length according to customer demand

Electrical Data
Rated voltage:60V
Insulation resistance:100MΩ
Rated current::7A
Contact resistance:≤5mΩ
Ambient temperature:-25°C~+85°C

Connector Specification
Polarity:2pin 3pins, 4pins,5pins,6pins,8pins 12pin 14pin 16pin 19pin 24pin
Overmold:Transparent TPU
Contacts:Brass with gold plated
Insert:TPU+GF
Coupling nut/screw:Brass with nickel plated

The AISG protocol is based on half-duplex communication and the HDLC protocol. The AISG bus is a single-master multi-slave bus. The communication medium can be RS-485 based using a dedicated cable as specified in the AISG standard, or it can be an OOK carrier injected into the RF antenna feeder cable at the base station site. The master device that controls the communication is called the master, and the slave devices on the bus are called auxiliaries and ALDs (antenna line devices). The main functions can be integrated into the base station. The primary can also be a stand-alone controller installed on the BTS site or a handheld/portable controller typically used during base station site installation. Ancillary device types include RET (Actuator Electronic Tilt Antenna Beam), TMA (Tower Mounted Amplifier), GLS (Geolocation Sensor) or ASD (Alignment Sensor Device).